Order Products : sales@su-jiao.com
Garathane™ X 96-320-B NAT
| Category: | PVC Alloy , Polyvinyl Chloride Alloy |
| Manufacturer: | AlphaGary |
| Trademark: | Garathane™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VGefUP_Garathane-X-96-320-B-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARATHANE X 96-320-B IS A PVC ALLOY FOOTWEAR COMPOUND |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 - 1.25 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 59 - 65 | ASTM D2240 | |
| Shaw A, 15 seconds | 51 - 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | |||
| loss, 1000 cycles | 0.450 | % | |
| loss, 5000 cycles | 2 | % | |
| Ross Flex (-29°C, 6.35 mm) | 20000 | ASTM D1052 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain, 1.91 mm) | 3.03 | MPa | ASTM D412 |
| Tensile Strength (1.91 mm) | 9.38 | MPa | ASTM D412 |
| Tensile Elongation (Break, 1.91 mm) | 370 | % | ASTM D412 |
| Aging | Nominal Value | Unit | |
|---|---|---|---|
| Change in Volume 1 | |||
| 23°C, 168 hr, in gasoline | -21 | % | |
| 23°C, 336 hr, in gasoline | -22 | % | |
| 23°C, 336 hr, in vegetable oil | -20 | % | |
| 75°C, 168 hr, in vegetable oil | -22 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 143 | °C | |
| Middle Temperature | 149 | °C | |
| Front Temperature | 154 | °C | |
| Nozzle Temperature | 166 | °C | |
| Processing (Melt) Temp | 160 - 166 | °C |
| Injection instructions |
|---|
| Zone 4: 320°FZone 5: 320°F |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 143 | °C | |
| Cylinder Zone 2 Temp. | 149 | °C | |
| Cylinder Zone 3 Temp. | 154 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 160 | °C | |
| Adapter Temperature | 166 | °C | |
| Melt Temperature | 160 - 166 | °C |
| Note Message | |
|---|---|
| 1 . | Thickness: 75 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8240-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Nylene® 9633 | Custom Resins Group | Nylon 66/6 | Nylene® |
| ALTECH® PC-HT A 1000/500 | ALBIS PLASTIC GmbH | PC | ALTECH® |
| Generic TPU-Polyester - Glass Fiber | Generic | TPU-Polyester | Generic |
| LEXAN™ 945U resin | SABIC Innovative Plastics | PC | LEXAN™ |
