Order Products : sales@su-jiao.com
Formolene® 6335N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VGFEGi_Formolene-6335N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene 3335N is a high melt flow random copolymer with fast cycle time, and easy mold release. It is designed for thin walled injection molding applications. Its stiffness makes it a good choice for applications requiring greater flex modulus than conventional random copolymers. Formolene 3335N meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 29.6 | MPa | ASTM D638 |
| Flexural Modulus - 1% Secant 2(Injection Molded) | 1520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, Injection Molded | 32 | J/m | |
| -18°C, Injection Molded | 37 | J/m | |
| 23°C, Injection Molded | 64 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 115 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYREX® PG-80 | CHI MEI CORPORATION | PS (GPPS) | POLYREX® |
| Fortron® 1130L0 | Celanese Corporation | PPS | Fortron® |
| Duron PEI 2100 | ProPolymers Inc. | PEI | Duron |
| KUBE PIR 22404 | KUBE Electronics AG | HDPE | KUBE PIR |
| Jackdaw PP EP16BK6600 | Jackdaw Polymers | PP Homopolymer | Jackdaw PP |
