Akulon® K224-PG6

Category: Nylon 6 , Polyamide 6
Manufacturer: DSM Engineering Plastics
Trademark: Akulon®
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: VEfRUK_Akulon-K224-PG6.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Akulon® K224-PG6 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America.

Important attributes of Akulon® K224-PG6 are:
  • Flame Rated
  • Impact Modified
General Information
Filler / Reinforcement
  • Glass Fiber, 30% Filler by Weight
Additive
  • Impact Modifier
Features
  • Impact Modified
Forms
  • Pellets
Multi-Point Data
  • Shear Modulus vs. Temperature (ISO 11403-1)
PhysicalDryConditionedUnitTest Method
Density 1.32--g/cm³ISO 1183
Molding Shrinkage ISO 294-4
     Across Flow 1.0--%
     Flow 0.39--%
Water Absorption ISO 62
     Saturation, 23°C 5.7--%
     Equilibrium, 23°C, 50% RH 1.7--%
MechanicalDryConditionedUnitTest Method
Tensile Modulus 85005500MPaISO 527-2
Tensile Stress (Break)145100MPaISO 527-2
Tensile Strain (Break)4.59.0%ISO 527-2
ImpactDryConditionedUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
     -30°C 1515kJ/m²
     23°C 2343kJ/m²
Charpy Unnotched Impact Strength ISO 179/1eU
     -30°C 100100kJ/m²
     23°C 95110kJ/m²
ThermalDryConditionedUnitTest Method
Heat Deflection Temperature
     0.45 MPa, Unannealed 215--°CISO 75-2/B
     1.8 MPa, Unannealed 200--°CISO 75-2/A
CLTE ISO 11359-2
     Flow 2.0E-5--cm/cm/°C
     Transverse 9.0E-5--cm/cm/°C
ElectricalDryConditionedUnitTest Method
Surface Resistivity --1.0E+14ohmsIEC 60093
Volume Resistivity 1.0E+151.0E+13ohms·cmIEC 60093
Electric Strength 2520kV/mmIEC 60243-1
Relative Permittivity IEC 60250
     100 Hz 3.8014.0
     1 MHz 3.504.50
Dissipation Factor IEC 60250
     100 Hz 9.0E-30.30
     1 MHz 0.0150.12
Comparative Tracking Index --600VIEC 60112
FlammabilityDryConditionedUnitTest Method
Flammability Classification (1.60 mm)HB--IEC 60695-11-10, -20
InjectionDryUnit
Drying Temperature 80.0°C
Drying Time 4.0 to 8.0hr
Rear Temperature 255 to 265°C
Middle Temperature 265 to 275°C
Front Temperature 265 to 280°C
Nozzle Temperature 260 to 280°C
Processing (Melt) Temp 250 to 285°C
Mold Temperature 50.0 to 80.0°C
Injection Rate Moderate-Fast
Back Pressure 3.00 to 10.0MPa
Screw Compression Ratio 2.5:1.0
Resin Grade Manufacturer Category Trademark
RTP 1381 TFE 20 RTP Company PPS RTP
Ferro PP CPP40GH38BK Ferro Corporation PP Copolymer Ferro PP
Generic PP, High Crystal - Talc Generic PP, High Crystal Generic
Elvax® 650Q DuPont Packaging & Industrial Polymers EVA Elvax®
Hyundai EP PA66 LD480 HYUNDAI EP Co., Ltd. Nylon 66 Hyundai EP PA66