Order Products : sales@su-jiao.com
KRATON® D1118 E
| Category: | SBC , Styrene Butadiene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VCf9hR_KRATON-D1118-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below.
Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.940 | g/cm³ | ISO 2781 |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content | |||
| ES | 0.15 to 0.40 | % | ISO 247 |
| ESM | 2.5 to 5.0 | % | Internal Method |
| ET | 0.20 to 0.40 | % | Internal Method |
| Extractables | < 1.0 | % | Internal Method |
| Polystyrene Content | 31 to 35 | % | Internal Method |
| Solution Viscosity - 25% Toluene (25°C) | 470 to 790 | mPa·s | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Diblock Content | 78 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 10 sec) | 74 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.20 | MPa | ISO 37 |
| Tensile Stress (Yield) | 2.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 600 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SureSpec HP-350NA | Genesis Polymers | PP Homopolymer | SureSpec |
| NYCOA Polyamide 7530 Nat | Nycoa (Nylon Corporation of America) | Nylon 12 | NYCOA Polyamide |
| HyTemp® AR71L | Zeon Chemicals L.P. | Acrylic, Unspecified | HyTemp® |
| Lucent PA G66-13 | Lucent Polymers, Inc. | Nylon 66 | Lucent PA |
| ULTEM™ 1110 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
