Order Products : sales@su-jiao.com
LARIPUR® LPR 2103-90AE
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | COIM S.p.A. |
| Trademark: | LARIPUR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VCTrKe_LARIPUR-LPR-2103-90AE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LARIPUR®LPR 2103-90AE is a thermoplastic polyurethane elastomer (polyether)(TPU-polyether) material,. This product is available in North America, Latin America or Europe. The processing method is extrusion or injection molding. LARIPUR®The main characteristics of LPR 2103-90AE are:
LARIPUR®Typical application areas of LPR 2103-90AE are: water pipes/pipes/drinking water |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain | 7.20 | MPa | ASTM D412 |
| 100% strain | 9.50 | MPa | ASTM D412 |
| 300% strain | 25.6 | MPa | ASTM D412 |
| Tensile Strength (Break) | 56.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 510 | % | ASTM D412 |
| Tear Strength | 94.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 70 hr | 22 | % | ASTM D395 |
| 70°C, 22 hr | 48 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ASTM D1525 |
| Additional Information |
|---|
| Abrasion loss, DIN 53516: 35 mm³ |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B12^ F25 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| Favorite LL505 | Favorite Plastics | LDPE+LLDPE | Favorite |
| ELASTOSIL® LR 3040/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Epiall® 1914A | Sumitomo Bakelite North America, Inc. | Epoxy | Epiall® |
| ULTEM™ HU1100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
