Order Products : sales@su-jiao.com
PermaStat® 200F
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | RTP Company |
| Trademark: | PermaStat® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VCDHSY_PermaStat-200F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.0 - 1.5 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.50 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 482 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 | % | ASTM D638 |
| Flexural Modulus | 414 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 17.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 530 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 1100 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+9 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.59 mm, Values per RTP Company testing.) | HB | UL 94 |
| Additional Information |
|---|
| Molding Shrinkage, ASTM D 955, 3.175mm: 10-15mm/mVolume Resistivity, ASTM D 257: 1000000000 - 10000000000 ohm-cmSurface Resistivity, ASTM D 257: 10000000000 - 100000000000 ohm/sqStatic Decay, FTMS-4046.1, Mil B-81705C: <2.0 secondsThe value listed as Flame Rating - UL was tested in accordance with RTP Company testing. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 221 - 254 | °C | |
| Middle Temperature | 221 - 254 | °C | |
| Front Temperature | 221 - 254 | °C | |
| Mold Temperature | 38.0 - 66.0 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPTON™ 4033 | Kuraray Co., Ltd. | SEEPS | SEPTON™ |
| SuperLite XLT® SLXLTA.0641BZ | Azdel, Inc. | PP, Unspecified | SuperLite XLT® |
| ALTECH® PC C 1000/547 FR | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| KEBAFLEX® P D55.1 | BARLOG plastics GmbH | TPC-ET | KEBAFLEX® |
| LNP™ LUBRICOMP™ PFI12R compound | SABIC Innovative Plastics | Nylon 6 | LNP™ LUBRICOMP™ |
