Order Products : sales@su-jiao.com
Novodur® Ultra 4140PG
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | Styrolution |
| Trademark: | Novodur® Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VAXGQL_Novodur-Ultra-4140PG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Novodur Ultra 4140PG is an ABS/PC plating grade combining high heat resistance and excellent impact strength with the unique surface properties of a Novodur ABS material. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) | ISO 1133 | ||
| 220°C/10.0 kg | 9.00 | cm³/10min | |
| 260°C/5.0 kg | 13.0 | cm³/10min | |
| Molding Shrinkage | 0.60 to 0.80 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness | 85.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2100 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 46.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield, 23°C | 3.5 | % | |
| Break, 23°C | > 15 | % | |
| Flexural Modulus | 2100 | MPa | ISO 178 |
| Flexural Stress | 72.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 28 | kJ/m² | |
| 23°C | 38 | kJ/m² | |
| Notched Izod Impact Strength | ISO 180/A | ||
| -30°C | 31 | kJ/m² | |
| 23°C | 40 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Annealed | 108 | °C | ISO 75-2/B |
| 1.8 MPa, Annealed | 99.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 106 | °C | ISO 306/B50 |
| CLTE - Flow | 9.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+15 | ohms·cm | IEC 60093 |
| Electric Strength 1(1.50 mm) | 37 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 3.00 | ||
| 1 MHz | 3.00 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 4.0E-3 | ||
| 1 MHz | 8.5E-3 | ||
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 230 to 270 | °C | |
| Mold Temperature | 70.0 | °C | |
| Injection Velocity | 240 | mm/sec |
| Note Message | |
|---|---|
| 1 . | Short Time |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2202 HF TFE 15 | RTP Company | PEEK | RTP |
| Network Polymers SMMA MS 170 | Network Polymers, Inc. | Acrylic (SMMA) | Network Polymers SMMA |
| Edgetek™ XT X XT 1000 Natural | PolyOne Corporation | Copolyester | Edgetek™ XT |
| KRYSTALFLEX™ PE900 | Huntsman Corporation | PUR-Eth,aliphat | KRYSTALFLEX™ |
| ASPIRE VINYL™ G750 | Axiall Corporation | PVC, Flexible | ASPIRE VINYL™ |
