Order Products : sales@su-jiao.com

SQUARE® LIM3906-70A/B

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Shenzhen SQUARE Silicone Co., Ltd.
Trademark:	SQUARE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	VAK2LK_SQUARELIM390670AB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Liquid silicone rubber material for cake mould Product Description SQUARE®LIM3906-XXXA/B is one kind of 2-part liquid silicone rubber suitable for injection molding processes. with excellent fluidity and storage under low temperature property,catalyzed by platinum. Key features Good rebound property High tensile and tear strength Excellent thermal and cold stability(-60°C - 250°C) Low yellowing Outstanding resistance to ageing Meet US FDA CFR21.Part.177.2600 and EN14350.2 At the temperature of 20°C and in the condition of air-proof,the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications SQUARE®LIM3906-XXA/B is suitable for making cake mould

Message

Liquid silicone rubber material for cake mould

Product Description
SQUARE®LIM3906-XXXA/B is one kind of 2-part liquid silicone rubber suitable for injection molding processes. with excellent fluidity and storage under low temperature property,catalyzed by platinum.

Key features

Good rebound property

High tensile and tear strength

Excellent thermal and cold stability(-60°C - 250°C)

Low yellowing

Outstanding resistance to ageing

Meet US FDA CFR21.Part.177.2600 and EN14350.2

At the temperature of 20°C and in the condition of air-proof,the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature.

Applications
SQUARE®LIM3906-XXA/B is suitable for making cake mould

General Information
Features	High tensile strength Good tear strength High liquidity Thermal stability, good
Agency Ratings	FDA 21 CFR 177.2600
Appearance	Translucent
Processing Method	Liquid Injection Molding (LIM)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.16	g/cm³	ASTM D792
Molding Shrinkage - Flow	2.2	%	JIS K6301

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	70		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Set ¹	1	%	ASTM D412
Tensile Strength	7.50	MPa	ASTM D412
Tensile Elongation (Break)	320	%	ASTM D412
Tear Strength ²	25.0	kN/m	ASTM D624

Thermoset	Nominal Value	Unit
Pot Life (20°C)	7200	min
Shelf Life	52	wk

Note Message
1 .	C mould
2 .	B mould

Resin Grade	Manufacturer	Category	Trademark
RTP 385 EM	RTP Company	PC	RTP
Teflon® PTFE 62XT X	DuPont Fluoropolymers	PTFE	Teflon® PTFE
Trilene® 76	Lion Copolymer, LLC	EPM	Trilene®
TRIPPS® 7A140	Samyang Corporation	PPS	TRIPPS®
AMPLIFY™ TY 1251	The Dow Chemical Company	MAH-g	AMPLIFY™ TY