Order Products : sales@su-jiao.com

Addisil™ IND 2050 E

Category:	Rubber , Rubber
Manufacturer:	Momentive Performance Materials Inc.
Trademark:	Addisil™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	V616H7_Addisil-IND-2050-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The Addisil IND 20X0 E series is a two-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80 Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.

Key Features and Benefits

Good transparency, no yellowing

Good mechanical performance

Dry, non-stick surface

Odourless during processing and in its application

Fast curing

Long shelf life of 6 months for the single components if stored appropriatelyM

Very long pot life of 2 to 4 weeks for the mixed components

Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations

General Information
Features	Fast Cure Food Contact Acceptable Heat Cure Low to No Odor Medium Clarity Non-Stick
Uses	Industrial Applications Non-specific Food Applications Profiles Tubing
Agency Ratings	BfR Food Contact, Unspecified Rating FDA 21 CFR 177.2600
Appearance	Clear/Transparent
Processing Method	Extrusion Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.15	g/cm³	DIN 53479

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	48		DIN 53505

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	10.0	MPa	DIN 53504
Tensile Elongation (Break)	700	%	DIN 53504
Tear Strength ¹	32.0	kN/m	ASTM D624
Compression Set (175°C, 22 hr)	25	%	DIN 53517

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0
Pot Life	20000 to 40000	min
Shelf Life	26	wk
Post Cure Time (200°C)	4.0	hr

Additional Information	Nominal Value	Unit
Vulcanization (175°C)	10.0	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Monprene® OM-10275-01	Teknor Apex Company	TPE	Monprene®
UBESTA 3030 JI6L	UBE Engineering Plastics, S.A.	Nylon 12	UBESTA
ALCOM® PC 740/40 FR UV WT1182-10LB	ALBIS PLASTIC GmbH	PC	ALCOM® PC
3M™ Dyneon™ PTFE Compound TF 6712	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound
Sylvin 8756-90 Grey 9323	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin