Order Products : sales@su-jiao.com
SQUARE® LIM1510-45A/B
| Category: | Silicone Rubber, LSR , Silicone Rubber, LSR |
| Manufacturer: | Shenzhen SQUARE Silicone Co., Ltd. |
| Trademark: | SQUARE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V3WB5Q_SQUARELIM151045AB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Liquid silicone rubber material for outdoor medium and high voltage resistance terminal Product Description 2-part liquid silicone rubber, which is particularly suitable for injection molding with tracking resistance 1A 3.5 grade, mixing ration of parts A:B=1:1, catalyzed by platinum. The appearance of A is transparent and B is grey. Key Features
At the temperature of 20 and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 35 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (300% strain, 120°C) | 8 | % | ASTM D412 |
| Tensile Strength | 8.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength 1 | 30.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Constant (50 Hz) | 2.80 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 1.6E-3 | IEC 60250 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Component a | Mixing ratio by weight: 1.0 | ||
| Component B | Mixing ratio by weight: 1.0 | ||
| Pot Life (20°C) | 7200 | min | |
| Shelf Life | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | |||
| -- 2 | Clear/Transparent | ||
| -- 3 | Grey | ||
| Solids Content | 100 | % | |
| Viscosity | 600 | Pa·s |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tracking Resistance | 1A4.5 | IEC 60587 |
| Note Message | |
|---|---|
| 1 . | B mould |
| 2 . | Part A |
| 3 . | Part B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR QD 818.Y001 | PolyOne Corporation | PP, Unspecified | Maxxam™ FR |
| Anjacom® 255-H/GF30 | Almaak International GmbH | Nylon 6 | Anjacom® |
| FRAGOM PR/112 UTW | Crosspolimeri S.p.A. | Polyolefin, Unspecified | FRAGOM |
| InSphere® 1020F | Synthos S.A. | PS (EPS) | InSphere® |
| OTECH TPO OTR8588 - Cord Jacket | OTECH Corporation | TPO | OTECH TPO |
