EMPILON® 785 Datasheet,SEBS,EMPILON-SHANGHAI SUSHENG

EMPILON® 785

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	EMPILON
Trademark:	EMPILON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	V0W7AY_EMPILON-785.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
EMPILON® 700 series compound has a higher Tensile Strength property, good resilience, excellent mechanical properties than that of the 500 series. EMPILON® 700 series can be applied in many fields of use, such as: hand grips, automotive parts, household goods, sporting goods, stationary, toys etc. Hydrogenated Styrenic Block Copolymer is the main content of this 700 series compound, its hardness ranges from Shore OO 33 to A 95. They can be processed by ordinary plastic machinery for Injection, extrusion or calendaring etc. EMPILON® 700 series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they also compliant with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb.Cd.Hg.Cr6+.PBB.PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC). EMPILON® 700 series compound retain good mechanical properties after solvent resistance testing and won't hydrolyze in water. It is not necessary to dehumidify before any molding process. For coloring, please select color master batch based on PE or EVA material with the exception of PVC. Higher screw speed and backpressure are needed for better colorant dispersion.

Message

EMPILON® 700 series compound has a higher Tensile Strength property, good resilience, excellent mechanical properties than that of the 500 series. EMPILON® 700 series can be applied in many fields of use, such as: hand grips, automotive parts, household goods, sporting goods, stationary, toys etc. Hydrogenated Styrenic Block Copolymer is the main content of this 700 series compound, its hardness ranges from Shore OO 33 to A 95. They can be processed by ordinary plastic machinery for Injection, extrusion or calendaring etc.

EMPILON® 700 series compound are non-toxic and free of Pb, Cd, Hg, Cr6+, Sb, As, Ba, Se, halogen and DOP plasticizer, they also compliant with the Restriction of the use of certain Hazardous Substance directive in electrical and electronic equipment (RoHS 2002/95/EC) and SONY SS-00259 4th that prohibit products that contain Pb.Cd.Hg.Cr6+.PBB.PBDE etc. They are 100% recyclable and comply with the Waste Electrical and Electronic Equipment directive (WEEE 2002/95/EC).

EMPILON® 700 series compound retain good mechanical properties after solvent resistance testing and won't hydrolyze in water. It is not necessary to dehumidify before any molding process. For coloring, please select color master batch based on PE or EVA material with the exception of PVC. Higher screw speed and backpressure are needed for better colorant dispersion.

General Information
Features	Block Copolymer Low (to no) lead content Calcium content, low (to none) Recyclable materials Hydrolysis resistance Non-toxic Halogen-free No antimony Elastic
Uses	Household goods Application in Automobile Field Sporting goods Toys Stationery
RoHS Compliance	RoHS compliance
Forms	Particle
Processing Method	Extrusion Calendering Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.05	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	13	g/10 min	ASTM D1238
Molding Shrinkage ¹
Flow	0.50	%
Transverse flow	0.80	%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 10 sec)	47		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (300% Strain)	6.77	MPa	ASTM D412
Tensile Strength	8.83	MPa	ASTM D412
Tensile Elongation (Break)	550	%	ASTM D412
Compression Set (23°C, 70 hr)	30	%	ASTM D395

Aging	Nominal Value	Unit	Test Method
Change in Tensile Strength in Air (125°C, 168 hr)	-4.0	%	ASTM D573
Change in Ultimate Elongation in Air (125°C, 168 hr)	-21	%	ASTM D573
Change in Durometer Hardness in Air (support d, 125°C, 168 hr)	1.0		ASTM D573

Thermal	Nominal Value	Unit
Brittleness Temperature	-50.0	°C

Injection	Nominal Value	Unit
Rear Temperature	175 - 190	°C
Middle Temperature	185 - 195	°C
Front Temperature	190 - 205	°C
Nozzle Temperature	190 - 210	°C
Processing (Melt) Temp	180 - 220	°C
Mold Temperature	40.0 - 50.0	°C
Injection Pressure	3.43 - 4.90	MPa
Injection Rate	Fast
Back Pressure	0.490 - 0.981	MPa
Screw Speed	Medium to high

Injection instructions
Hold Time: 5 sec.Cycle Time: 15~25 sec.

Note Message
1 .	Reference Only

Resin Grade	Manufacturer	Category	Trademark
SAXAMID™ 226U	SAX Polymers	Nylon 66	SAXAMID™
SITRALOY 605 / DC 9051	SITRAPLAS GmbH	PC+ABS	SITRALOY
AEI SX559:CM540U	AEI Compounds Limited	XLPE	AEI
Badaflex® TPE-S 55A 1000LD	Bada AG	TPE	Badaflex®
Aurora PVC AP1250 Series	Aurora Plastics, Inc.	PVC, Unspecified	Aurora PVC

Resin Grade

Manufacturer