Order Products : sales@su-jiao.com
CERTENE™ SIS-030
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V0S3bH_CERTENE-SIS-030.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SIS-030 is a certified prime grade specially developed for EXTRUSION-THERMOFORMING applications requiring good Elongation and Rigidity. SIS-030 is a medium-flow grade that offers excellent melt uniformity and consistency of flow, very good extrusion and thermoform processability, and superior Impact resistance. The low residual volatiles of this resin makes it particularly suitable for packaging taste and odor sensitive articles. SIS-030 applications include deep-draw vacuum-forming tubs for ice-cream, drink and yogurt cups, lids, plates, and customized multiplayer sheet coextrusion. SIS-030 complies with FDA regulation 21CFR 177.1640, and with most international regulations concerning the use of Polystyrene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness 1(R-Scale) | 55 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2200 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, Injection Molded) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 45 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Injection Molded) | 2280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature 5 | 102 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID B 280 R3 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| Thermoset Plastics 200 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| Escorene™ Ultra UL 04028CC | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| OmniPro™ HPP CCF30 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
| Braskem PE SLL218/21 | Braskem | LLDPE | Braskem PE |
