Order Products : sales@su-jiao.com
Kaneka MUH E1500
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Kaneka Corporation |
| Trademark: | Kaneka MUH |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | V09hrX_Kaneka-MUH-E1500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Kaneka MUH E1500 is an acrylonitrile butadiene styrene (ABS) material,. This product is available in North America and is processed by injection molding. The main features of Kaneka MUH E1500 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 - 0.80 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 110 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 50.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 15 | % | ASTM D638 |
| Flexural Modulus | 2650 | MPa | ASTM D790 |
| Flexural Strength | 77.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.40 mm) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 115 | °C | ASTM D648 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gardner Gloss (60°) | 90 | ASTM D523 |
| Additional Information |
|---|
| Reflective Rate Mirror, ASTM D523, 60°: 90 %Reflective Rate Texture, ASTM D523, 60°: 5 %Spiral Flow, Kaneka Method, 482°F, 3 mm: 18.5 in |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 240 - 260 | °C | |
| Middle Temperature | 240 - 260 | °C | |
| Front Temperature | 240 - 260 | °C | |
| Processing (Melt) Temp | 280 | °C | |
| Mold Temperature | 50.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® GFT13-66 XE-WT1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| Grilamid® 2S 20 nat | EMS-GRIVORY | Nylon 610 | Grilamid® |
| Huafon JF-A-WP1010 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| LUVOCOM® 1301-8956 | Lehmann & Voss & Co. | PPS | LUVOCOM® |
| Polifor® C L6 GF/30 NATURALE | SO.F.TER. SPA | PP Copolymer | Polifor® |
