Order Products : sales@su-jiao.com
Estane® 58211 TPU
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Uzt5ys_Estane-58211-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Estane® 58211 is a 90A Polyether-Type Thermoplastic Polyurethane (TPU). Features: Halogenated flame retardant compound - High hardness Uses: Extrusion - wire and cable jacketing and general extrusion where flame retardant propertied are required |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 87 - 93 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 235 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 8.60 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 14.8 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 27.9 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 340 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 84.3 | kN/m | ASTM D624 |
| Cracking | 22 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -38.0 | °C | DSC |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 32 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 183 | °C | |
| Cylinder Zone 2 Temp. | 188 | °C | |
| Cylinder Zone 3 Temp. | 196 | °C | |
| Cylinder Zone 4 Temp. | 199 | °C | |
| Adapter Temperature | 202 | °C | |
| Melt Temperature | 190 | °C | |
| Die Temperature | 196 - 202 | °C |
| Extrusion instructions |
|---|
| Dew Point: -40°CScreen Pack Recommendation: 20/40 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| YUPLENE® B360F | SK Global Chemical | PP Impact Copolymer | YUPLENE® |
| Flontech® FT-910-ST | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| HOPELEN Y-120A | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| POLYfill PP EIP2012 F | Polykemi AB | PP, Unspecified | POLYfill |
| Sylvin 5132-75 Clear 8350 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
