Order Products : sales@su-jiao.com
CERTENE™ LLBF-120J
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UyZ4nq_CERTENE-LLBF-120J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLBF-120J is a certified prime resin with Butene-comonomer, designed for production of Blown films used in general purpose packaging. LLBF-120J features excellent combination of easy processability with good film strength as well as wide heat sealing temperature range. LLBF-120J applications include garment bags, produce bags and liners. LLBF-120J contains no slip and high antiblock. LLBF-120J complies with FDA regulation 21CFR 177.1520(c)3.1a and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 25 µm | 193 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm | 223 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 9.38 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 9.51 | MPa | ASTM D882 |
| MD : Break, 25 µm | 34.5 | MPa | ASTM D882 |
| TD : Break, 25 µm | 27.6 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 550 | % | ASTM D882 |
| TD : Break, 25 µm | 820 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 85 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 100 | g | ASTM D1922 |
| TD : 25 µm | 600 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.4 µm, Blown Film) | 35 | ASTM D2457 | |
| Haze (25.4 µm, Blown Film) | 20 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mils (25 µm) film using barefoot version; melt temperature 390-395°F; blow-up-ratio 2.5 :1. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 199 - 202 | °C |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP PPH3TF4-Natural | Washington Penn Plastic Co. Inc. | PP Homopolymer | WPP PP |
| Fainplast PVC HGKA 88/1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| elitel UE3215 | UNITIKA Plastics Division | TPC-ET | elitel |
| Grilon® TSG-30/4 H black 9836 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| OmniPro™ HPP GMR20 WS02 BK1000 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
