Order Products : sales@su-jiao.com

Keliren® CPE1135C

Category:	CPE , Chlorinated Polyethylene
Manufacturer:	Hangzhou Keli Chemical Co., Ltd.
Trademark:	Keliren®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UturgV_Keliren-CPE1135C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound. Application: FR-ABS, Flexible PVC, PE Film Performance: Excellent processing flowability and minimal residual crystal.

Message

Keliren® Chlorinated Polyethylene(CPE) thermoplastic resins are widely used as impact modifiers in PVC extrusion and injection molding applications, especially in products such as siding, widow profiles and pipe. The low dosage levels of Keliren® resins with rigid PVC resins can significantly improve impact strength and also act as a processing aid. In addition to offering attributes such as good chemical resistance, excellent low temperature properties, high filler level acceptance and excellent compatibility with a broad range of formulation ingredients, Keliren® resins offer excellent resistance to weathering in a properly formulated compound.

Application: FR-ABS, Flexible PVC, PE Film

Performance: Excellent processing flowability and minimal residual crystal.

General Information
Features	Good Abrasion Resistance Good Chemical Resistance Good Impact Resistance Good Weather Resistance High Flow Low Temperature Resistant
Uses	Additive

Physical	Nominal Value	Unit	Test Method
Chlorine Content	34.0 to 36.0	wt%	ISO 7725

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	< 57		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Break)	> 8.50	MPa	ISO 37
Tensile Elongation (Break)	> 800	%	ISO 37

Resin Grade	Manufacturer	Category	Trademark
NILENE® E10 K30T	Taro Plast S.p.A.	PP Copolymer	NILENE®
ALTECH® PA66 A 2030/588 GF30LS BK0004-00LS	ALBIS PLASTIC GmbH	Nylon 66	ALTECH® PA66
GELAST GT59IT	Guang Sung Plastics (GSPL)	TP, Unspecified	GELAST
Hiprolon® 11 ECN Gray H8L	Arkema	Nylon 1012	Hiprolon®
KOCETAL® K100BK	Kolon Plastics, Inc.	Acetal (POM) Copolymer	KOCETAL®