Order Products : sales@su-jiao.com
Menzolit® MMC 1600
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Menzolit Ltd (UK) |
| Trademark: | Menzolit® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UsKWLH_Menzolit-MMC-1600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Menzolit® MMC 1600 is a mineral moulding compound based on unsaturated polyester resin. The product is glass fibre reinforced and contains mineral fillers. In case of fire the product doesn't melt, neither does it form droplets nor is smoke generation excessive. The material is compression moulded in heated steel moulds. It is must to work with chrome plated moulds. The product contains no halogens. Menzolit® MMC 1600 is a mineral moulding compound (similar to DMC/BMC) providing of a stone like appearance eg. granite or marble. Chrome plated mould surfaces are required. It is recommended that product thickness is not less than 3mm. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Part Marking Code (ISO 11469) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.80 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.16 | % | ISO 2577 |
| Water Absorption (Saturation, 23°C) | < 0.50 | % | ISO 62 |
| Post Shrinkage | 0.0 | % | DIN 53464 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Glow Bar | BH2 <= 10 | IEC 60707-3 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 6000 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Compression Molded) | 12.0 | MPa | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 6000 | MPa | ISO 178 |
| Flexural Stress (Compression Molded) | 30.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (Compression Molded) | 9.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | > 240 | °C | ISO 75-2/A |
| Continuous Use Temperature | 170 | °C | Internal Method |
| Glass Transition Temperature | 170 | °C | DSC |
| CLTE - Flow | 1.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Comparative Tracking Index | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature | 960 | °C | IEC 60695-2-13 |
| Oxygen Index | 35 | % | ISO 4589-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 145 to 165 | °C | |
| Injection Pressure | 8.00 to 10.0 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9300-55 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| Versollan™ RU 2205-9 | PolyOne Corporation | TPE | Versollan™ |
| NOVALAC XB-22 | Vyncolit N.V. | Phenolic | NOVALAC |
| Magnobond 87 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| Plaslube® NY-1/SI/2 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
