Order Products : sales@su-jiao.com
Comco PEEK GF 30
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Comco-Plastic GmbH |
| Trademark: | Comco |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ureolr_Comco-PEEK-GF-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Comco PEEK GF 30 is a Polyetheretherketone (PEEK) material filled with 30% glass fiber. It is available in Europe. Primary attribute of Comco PEEK GF 30: Flame Rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.51 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| Saturation, 23°C | 0.30 | % | |
| Equilibrium, 23°C, 50% RH | 0.14 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 99 | ISO 2039-2 | |
| Ball Indentation Hardness | 270 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6300 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 90.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 5.0 | % | ISO 527-2 |
| Compressive Stress | ISO 604 | ||
| 2% Strain | 81.0 | MPa | |
| 1% Strain | 41.0 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 35 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 230 | °C | ISO 75-2/A |
| Melting Temperature | 340 | °C | |
| CLTE - Flow | |||
| 23 to 60°C | 3.0E-5 | cm/cm/°C | |
| 23 to 100°C | 3.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.30 | W/m/K | |
| Maximum Service Temperature | |||
| in air continuosly | 250 | °C | |
| in air for short periods | 310 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+14 | ohms·cm | IEC 60093 |
| Electric Strength | 24 | kV/mm | IEC 60243-1 |
| Relative Permittivity | IEC 60250 | ||
| 100 Hz | 3.20 | ||
| 1 MHz | 3.60 | ||
| Dissipation Factor | IEC 60250 | ||
| 100 Hz | 1.0E-3 | ||
| 1 MHz | 2.0E-3 | ||
| Comparative Tracking Index | 175 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 | ||
| Oxygen Index | 40 | % | ISO 4589-2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ FR PE CONC 1 NAT | PolyOne Corporation | LDPE | Maxxam™ FR |
| Synres-Almoco DAP 5562 | Synres-Almoco BV | DAP | Synres-Almoco |
| ULTEM™ UC1200 resin | SABIC Innovative Plastics Asia Pacific | PEI | ULTEM™ |
| Ferro PP TPP40AC50HB-BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| Gallonprene® GP210-7011 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
