Order Products : sales@su-jiao.com
RTP 2201.3 HF
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Up7gHr_RTP-2201-3-HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.30 to 0.50 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.17 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 8270 | MPa | ASTM D638 |
| Tensile Strength | 127 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 5510 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 193 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 48 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 450 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 232 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 343 to 388 | °C | |
| Middle Temperature | 343 to 388 | °C | |
| Front Temperature | 343 to 388 | °C | |
| Mold Temperature | 163 to 218 | °C | |
| Injection Pressure | 83.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LXR512T | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| SLOVASTER® B1 GF 15 FRX 5 | Plastcom | PBT | SLOVASTER® |
| APICAL 150AF019 | Kaneka Corporation | Film, PI | APICAL |
| Etinox® EK-7731 | Ercros, S.A. | PVC, Flexible | Etinox® |
| Paryls® PES F2250 | Youju New Materials Co., Ltd. | PESU | Paryls® |
