Order Products : sales@su-jiao.com
ALCUDIA® EBA PA-1303
| Category: | EBA , Ethylene Butyl Acrylate Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® EBA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UoxrkC_ALCUDIA-EBA-PA-1303.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EBA ALCUDIA® PA-1303 is a copolymer suitable for blown film applications where good flexibility and very good mechanical properties are required. The butyl acrylate content is 13%. TYPICAL APPLICATIONS
Recommended melt temperature 180°C. Processing characteristics of PA-1303 are similar to LDPE and conventional polyethylene extruders are recommended. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.925 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| n-Butyl Acrylate Content | 13.0 | wt% |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 1.3 | ISO 8295 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 200 | µm | |
| Tensile Stress | ISO 527-3 | ||
| MD : Fracture, 200 µm, blown film | 20.0 | MPa | ISO 527-3 |
| TD : Fracture, 200 µm, blown film | 22.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : Fracture, 200 µm, blown film | 570 | % | ISO 527-3 |
| TD : Fracture, 200 µm, blown film | 600 | % | ISO 527-3 |
| Dart Drop Impact (200 µm, blown film) | > 1500 | g | ISO 7765-1 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD : 200 µm, blown film | 13 | N | ISO 6383-2 |
| TD : 200 µm, blown film | 13 | N | ISO 6383-2 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 101 | °C |
| Additional Information |
|---|
| Data taken from 200 µm thickness film, blow up ratio 1:2.5, frost line height 50 cm. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201 C | RTP Company | Nylon 11 | RTP |
| Propafilm™ RXD140 | Innovia Films Ltd. | PP Alloy | Propafilm™ |
| UBE Nylon 7034 B | UBE Engineering Plastics, S.A. | Nylon 612 | UBE Nylon |
| Nylene® 7139 HS | Custom Resins Group | Nylon 66 | Nylene® |
| Bynel® 50E806 | DuPont Packaging & Industrial Polymers | PP, Unspecified | Bynel® |
