Order Products : sales@su-jiao.com

Nylene® 406F

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UkG81G_Nylene-406F.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Resin formulated to comply with FDA regulation 21CFR 177.1500 for food contact applications, and ANSI/NSF Standard 14

General purpose, fast cycling molding resin

Crystallization initiators provide fast molding cycles through rapid melt set-up

Parts molded from 406F have better dimensional stability at moisture equilibrium than parts molded from conventional nylon

General Information
Features	Fast Molding Cycle Food Contact Acceptable General Purpose Good Dimensional Stability
Uses	General Purpose
Agency Ratings	FDA 21 CFR 177.1500 NSF 14

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.13	g/cm³	ASTM D792

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	75.2	MPa	ASTM D638
Tensile Elongation (Break, 23°C)	25	%	ASTM D638
Flexural Modulus (23°C)	2760	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	43	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	182	°C
1.8 MPa, Unannealed	71.1	°C
Peak Melting Temperature	216	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
Santoprene™ 121-80W175	ExxonMobil Chemical	TPV	Santoprene™
Torayca® TLP8148	Toray Resin Company	PP, Unspecified	Torayca®
Exxtral™ Performance Polyolefin HMU202	ExxonMobil Chemical	TPO	Exxtral™ Performance Polyolefin
KetaSpire® KT-880P	Solvay Specialty Polymers	PEEK	KetaSpire®
Indothene HD 52GB003	Reliance Industries Limited	HDPE	Indothene HD