Order Products : sales@su-jiao.com
Westlake LDPE EC474AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UgIf2d_Westlake-LDPE-EC474AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| WESTLAKE low-density polyethylene EC474 is a general-purpose formulation used for extrusion coating and laminating. It can be drawn down to low coating weights, is processable at high speeds, has good moisture barrier, and is heat-sealable at low temperatures. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | 8.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 138 | MPa | ASTM D638 |
| Tensile Strength (Break) | 9.65 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 302 to 329 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® 700 X01 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| TUFNYL® SGF 30 RED | SRF Ltd. | Nylon 6 | TUFNYL® |
| NYLOY® MG-1033NM | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Comco Lube | Comco-Plastic GmbH | Nylon, Unspecified | Comco |
| ALTECH® PA66 ECO 1000/617.03 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
