Order Products : sales@su-jiao.com
Halene L 73204T
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene L |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ueq7XC_Halene-L-73204T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
73204 T is a Rotomolding grade LLDPE produced by Spherilene Technology with controlled morphology, excellent balance of processability & mechanical properties. 73204 T is ideally suited for tanks and containers for domestic and industrial water storage, sanitation and agriculture. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.932 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (10% Igepal, F50) | 500 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 17.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | 900 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 550 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 500 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 115 | °C | ASTM D1525 4 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Oven Temperature | 240 to 280 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® D (142 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Evoprene™ 3275 | AlphaGary | SBS | Evoprene™ |
| Fixmaster Wear Resistant Putty | Loctite® | Epoxy | Fixmaster |
| LTP PL004 | Chengdu Letian Plastics Co., Ltd | PPS | LTP |
| POCAN® TP 740-101 000000 | LANXESS GmbH | PBT+ASA | POCAN® |
