Order Products : sales@su-jiao.com
Trilliant™ HC HC0200-5001 XR Grey
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Trilliant™ HC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UeT3rV_Trilliant-HC-HC0200-5001-XR-Grey.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The Trilliant® specialty compounds offer a complete system of specialty engineered materials, certified processes, services and technical support that enable healthcare OEM's to get to market ahead of competition. When specified, Trilliant® compound may incorporate agency rated materials that meet USP Class IV, FDA or ISO 10993 testing requirements. This Trilliant® grade is a high density specialty compound featuring a sustainable material solution for radiation shielding and weighting & balancing applications. The composite material offers a high performance thermoplastic-based alternative to lead. This compound has densities similar to traditional metals and provides greater flexibility in design and processing. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 8.00 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.50 - 1.5 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 3.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 200 | % | ISO 37 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 20 - 30 | % | ISO 815 |
| 70°C, 22 hr | 80 - 90 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity 1 | 1.0 - 2.0 | W/m/K | ASTM E1461 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+6 - 1.0E+9 | ohms | IEC 60093 |
| Additional Information |
|---|
| Shielding properties:Attenuation coefficient at 511 keV = 0.83cm-1Half Thickness at 511 keV = 0.84cm |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 200 - 220 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Through Plane |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 781 | RTP Company | HDPE | RTP |
| HIVOREX 5500B | Lotte Chemical Corporation | HDPE | HIVOREX |
| Lion Idemitsu Composites PPS T524A1 | Lion Idemitsu Composites Co., Ltd. | PPS | Lion Idemitsu Composites PPS |
| Plaslube® PA6/6 GF33 TL15 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| LUVOCOM® 1105-9232 | LEHVOSS Group | PEEK | LUVOCOM® |
