Order Products : sales@su-jiao.com
KRATON® D1133 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UXSyIY_KRATON-D1133-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1133 K is a clear, linear triblock copolymer based on styrene and butadiene, with a polystyrene content of 36%. It is supplied from North America in the physical form identified below.
Kraton D1133 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | < 1.0 | g/10 min | |
| Antioxidant Additive 1 | 0.15 to 0.40 | % | Internal Method |
| Ash Content | Internal Method | ||
| KIM | 4.0 to 6.0 | wt% | |
| KT | 0.2 to 0.4 | wt% | |
| Polystyrene Content | 34 to 38 | % | Internal Method |
| Solution Viscosity - Toluene, 15%wt (25°C) | 350 to 490 | mPa·s | Internal Method |
| Total Extractables | < 1.6 | % | Internal Method |
| Volatile Matter | < 1.0 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 34.0 | ||
| Styrene/Rubber ratio | 36/64 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 74 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 2.07 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Non-staining phenolic antioxidant |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 MG 30 MS 2 | RTP Company | Nylon 66 | RTP |
| RTP 803 | RTP Company | Acetal (POM) Copolymer | RTP |
| Ad-Tech Epoxy EL-324-SC | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Laprene® 8KS901A90/H | SO.F.TER. SPA | SEBS | Laprene® |
| Sylvin 916VO-95 White 1469 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
