Order Products : sales@su-jiao.com
AMTOPP CH30
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Inteplast Group |
| Trademark: | AMTOPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UXIqg0_AMTOPP-CH30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Metalizable Base CoEx Heat Sealable BIAXIALLY ORIENTED POLYPROPYLENE FILM ONE SIDE SEALABLE FOR FOOD PACKAGING |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Dimensional Stability | |||
| Across Flow, 130°C 1 | < 3.0 | % | |
| Flow, 130°C 2 | < 5.0 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 117 | MPa | |
| TD : Yield | 207 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 190 | % | |
| TD : Break | 70 | % | |
| Oxygen Transmission Rate (22°C, 0% RH) | 1500 | cm³/m²/24 hr | ASTM D3985 |
| Water Vapor Transmission Rate (38°C, 90% RH) | 4.7 | g/m²/24 hr | ASTM F1249 |
| Yield 3 | 36.6 | m²/kg |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Seal Temperature 4 | 121 | °C | |
| Surface Energy | 42 | dyne/cm | ASTM D2578 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 2.5 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 5 minuites |
| 2 . | 5 minutes |
| 3 . | Internal Method |
| 4 . | 1/2 sec, 30 PSI |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN AE8000 | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| TORZEN® U4820L NC01 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Eastar™ AN014, Natural | Eastman Chemical Company | Copolyester | Eastar™ |
| LUVOCOM® 1105-8158 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Hostacom TRC 411N G61309 | LyondellBasell Industries | PP Copolymer | Hostacom |
