Order Products : sales@su-jiao.com

Nylene® 494

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Custom Resins Group
Trademark:	Nylene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UV5uxu_Nylene-494.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This data sheet applies to products: Nylene 494, Nylene 494P and Nylene 494 BLK

For rotational molding, and is offered in small pellet form as well as a 20 mesh powder.

All Nylene rotomolding grade nylons are dried to less than 0.15% moisture eliminating the need for pre-drying of virgin material.

PRC strongly recommends the use of inert gases such as nitrogen in the mold to minimize thermal degradation of the nylon.

General Information
Forms	Pellets Powder
Processing Method	Rotational Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.20	g/cm³	ASTM D792
Molding Shrinkage - Flow	1.5 to 2.0	%	ASTM D955
Water Absorption (Saturation)	1.3	%	ASTM D570
Relative Viscosity	70.0

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (23°C)	79.3	MPa	ASTM D638
Tensile Elongation (Yield, 23°C)	100	%	ASTM D638
Flexural Modulus (23°C)	2550	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	53	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	177	°C
1.8 MPa, Unannealed	73.9	°C

Resin Grade	Manufacturer	Category	Trademark
Tenac™ FS410	Asahi Kasei Chemicals Corporation	Acetal (POM) Homopolymer	Tenac™
Hetron™ FR 650 INF-20	Ashland Performance Materials	Polyester, TS	Hetron™
LEXAN™ EXL6013 resin	SABIC Innovative Plastics Europe	PC	LEXAN™
LNP™ THERMOTUF™ WF006I compound	SABIC Innovative Plastics	PBT	LNP™ THERMOTUF™
LUVOCOM® 1-1129	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®