Order Products : sales@su-jiao.com
RTP 799 X 143519 EG
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | URrskF_RTP799X143519EG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESD Protection - Permanently Static Dissipative - Extrusion Grade |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | < 1.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 2.0 - 4.0 | % | ASTM D955 |
| Moisture Content | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay | sec | FTMS 101C 4046.1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 414 | MPa | ASTM D638 |
| Tensile Strength | 15.9 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 483 | MPa | ASTM D790 |
| Flexural Strength | 15.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | No Break | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+8 - 1.0E+10 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+7 - 1.0E+9 | ohms·cm | ASTM D257 |
| Injection instructions |
|---|
| Do not exceed 520 °F (270 °C) melt temperature.Desiccant Type Dryer Required. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79 | °C | |
| Drying Time | 2.0 | hr | |
| Melt Temperature | 182 - 216 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Topolymer® 5321-751E | Dongguan Top Polymer Enterprise | TPE | Topolymer® |
| BESTNYL SI00VI12BWX | Triesa Plastics | Nylon 6 | BESTNYL |
| CALP E4331 | Lion Idemitsu Composites Co., Ltd. | Polyolefin, Unspecified | CALP |
| OTECH PVC OE7276 - Profile | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| Vydyne® 63A | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
