Order Products : sales@su-jiao.com
Premier HD00354
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | URgnad_Premier-HD00354.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier HD00354 is a high density polyethylene designed for blow molding applications requiring high stiffness and stress crack resistance. Also usable as a sheet extrusion and thermoforming resin. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| 10% Igepal, F50 | 35.0 | hr | ASTM D1693B |
| 100% Igepal, F50 | 37.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 50.8 mm) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 50.8 mm) | > 550 | % | ASTM D638 |
| Flexural Modulus | 1380 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Strator® A-5 HTX | EPIC Polymers | Nylon 66 | Strator® |
| TEREZ PA 6.6 7500 GF 20 GK 10 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Carbotex K-20UV28 | Kotec Corporation | PC | Carbotex |
| Lytex 4149 | Quantum Composites Inc. | Epoxy | Lytex |
| OTECH TPO OTO9097 - Cord Insulation | OTECH Corporation | TPO | OTECH TPO |
