Order Products : sales@su-jiao.com
Thermylene® P6-30FM-Y249B
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Asahi Kasei Plastics North America Inc. |
| Trademark: | Thermylene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | URRTcw_Thermylene-P6-30FM-Y249B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PP-GF+MD 30% Glass Fiber / Mineral Co-Reinforcement |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 52.0 | MPa | ISO 527-2 |
| Flexural Modulus | 4900 | MPa | ISO 178 |
| Flexural Stress | 81.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.3 | kJ/m² | ISO 179 |
| Notched Izod Impact Strength | 4.3 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 125 | °C | ISO 75-2/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Purac PLA Blend C | Purac | PLA | Purac PLA |
| SWANCOR Epoxy 917 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| MonoSol® F300 | MonoSol, LLC | CA | MonoSol® |
| Moplen EP300R | PolyMirae | PP Copolymer | Moplen |
| STYRON™ 685D | Trinseo | PS (GPPS) | STYRON™ |
