Order Products : sales@su-jiao.com
Generic Silicone
| Category: | Silicone , Silicone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UQhZbQ_Generic-Silicone.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Silicone This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.958 to 1.29 | g/cm³ | ASTM D792 |
| -- | 1.05 to 1.49 | g/cm³ | ASTM D1505 |
| Apparent Density | 1.08 to 1.17 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 0.10 to 3.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 10 to 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 0.228 to 7.12 | MPa | |
| 23°C | 0.0552 to 3.33 | MPa | |
| Tensile Elongation (Yield, 23°C) | 50 to 460 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (23°C) | 2 to 14 | % | ASTM D412 |
| Tensile Stress (100% Strain, 23°C) | 0.0552 to 2.48 | MPa | ASTM D412 |
| Tensile Strength | ASTM D412 | ||
| Yield, 23°C | 3.30 to 9.09 | MPa | |
| Break, 23°C | 2.59 to 8.99 | MPa | |
| Tensile Elongation (Break, 23°C) | 140 to 1000 | % | ASTM D412 |
| Tear Strength (23°C) | 9.78 to 41.2 | kN/m | ASTM D624 |
| Compression Set | 14 to 62 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 169 to 343 | °C | ASTM D794 |
| Brittleness Temperature | -45.8 to -45.6 | °C | ASTM D746 |
| CLTE - Flow | 1.1E-4 to 1.0E-3 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity (23°C) | 0.014 to 0.36 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 10 to 3.2E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 13 to 27 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 2.64 to 3.62 | ASTM D150 | |
| Dissipation Factor (23°C) | 6.0E-5 to 4.4E-3 | ASTM D150 | |
| Arc Resistance | 117 to 252 | sec | ASTM D495 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Refractive Index | 1.396 to 1.540 | ASTM D542 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 0.22 to 29000 | min | |
| Shelf Life (23°C) | 26 to 28 | wk | |
| Thermoset Mix Viscosity | 15.0 to 77500 | cP | ASTM D2393 |
| Demold Time | 0.50 to 1500 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | Amber Beige Black Blue Brown Clear/Transparent Colorless Green Grey Grey, Light Ivory Opaque Red Tan Translucent Transparent, Light Blue Transparent, Light White Transparent, Light Yellow Turquoise White Yellow | ||
| Density (23°C) | 0.339 to 27.3 | g/cm³ | |
| Viscosity (23°C) | 1.0E-3 to 170 | Pa·s | |
| Curing Time (23°C) | 0.17 to 1.7E+2 | hr | |
| Pot Life (23°C) | 2.3 to 6500 | min | |
| Extrusion Rate | 248 to 800 | ml/min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (23°C) | 18 to 81 | ||
| Lap Shear Strength (23°C) | 0.684 to 4.38 | MPa | |
| Tensile Modulus (23°C) | 0.350 to 0.415 | MPa | |
| Tensile Strength (23°C) | 0.276 to 11.1 | MPa | |
| Tensile Elongation at Break (23°C) | 15 to 810 | % | |
| Compression Set (23°C) | 9.5 to 35 | % | |
| Tear Strength (23°C) | 2.35 to 36.1 | kN/m | |
| Rebound Resilience (23°C) | 49 to 67 | % | |
| Arc Resistance | 240 to 420 | sec | |
| Electric Strength (23°C) | 19 to 26 | kV/mm | |
| Relative Permittivity (23°C) | 2.65 | ||
| Volume Resistivity (23°C) | 1.0 to 6.0E+15 | ohms·cm | |
| Dissipation Factor (23°C) | 2.0E-4 to 0.050 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TOTAL Polypropylene Aceso® PPM R020 | TOTAL Refining & Chemicals | PP Random Copolymer | TOTAL Polypropylene |
| ASTALAC™ ABS M163 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Fainplast PVC RK 912 | Fainplast Compounds S.r.l | PVC, Rigid | Fainplast PVC |
| Jam PE 12YF6 | Jam Petrochemical Company | LLDPE | Jam PE |
| Lucky Enpla LKG | Lucky Enpla Co LTD | ABS | Lucky Enpla |
