Order Products : sales@su-jiao.com
RTP 2109 UP
| Category: | PEI , Polyether Imide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UQTggf_RTP-2109-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.70 | g/cm³ | ISO 1183 |
| Moisture Content | 0.040 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 50 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 18000 | MPa | ISO 527-2 |
| Tensile Stress | 200 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 1.5 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 17000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 285 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 10 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 35 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 150 | °C | |
| Drying Time - Desiccant Dryer | 4.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 355 - 400 | °C | |
| Mold Temperature | 135 - 175 | °C | |
| Injection Pressure | 80.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan A-7170/B-8260 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| Nymax™ X GMF 604 40 UV Black 148 rev 4 | PolyOne Corporation | Nylon 6 | Nymax™ |
| Durethan® BKV 130 CS DUS008 600091 | LANXESS GmbH | Nylon 6 | Durethan® |
| PolyBlend™ 1100 80A | CardioTech International, Inc. | PUR, Unspecified | PolyBlend™ |
| PENTAMID B GK30 H LS natural | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
