Order Products : sales@su-jiao.com
Integra™ PC-5022 F1 FRA
| Category: | PC , Polycarbonate |
| Manufacturer: | PolySource, LLC |
| Trademark: | Integra™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UMDioh_IntegraPC5022F1FRA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Flame Retardant, Medium Viscosity, UV Stabilized Polycarbonate |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 62.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 75 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2210 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.35 mm) | 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 137 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 121 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.6 mm | V-0 | UL 94 | |
| 3.2 mm | 5VA | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Promyde® B30 P2 G40 | NUREL, S.A. | Nylon 6 | Promyde® |
| TEREZ PA 6 7100 X | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| TEREZ PA 6 7500 TF 20 GF 20 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Adell Polyamide AM-30 | Adell Plastics, Inc. | Nylon 66 | Adell Polyamide |
| Grivory® HT1V-45 HY black 9205 | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
