Order Products : sales@su-jiao.com
IDI BMC Rosite 3550A
| Category: | TS, Unspecified , Thermoset, Unspecified |
| Manufacturer: | IDI Composites International |
| Trademark: | IDI BMC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ULgTel_IDI-BMC-Rosite-3550A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRODUCT SERIES: Rosite 3000 SERIES BMC PRODUCT DESCRIPTION: HIGH STRENGTH UL YELLOW CARD These high strength BMC composites are suitable for use in electrical applications requiring materials that possesses dielectric properties and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| UL File Number |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.10 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 20.7 | MPa | ASTM D638 |
| Flexural Modulus | 10300 | MPa | ASTM D790 |
| Flexural Strength | 51.7 | MPa | ASTM D790 |
| Compressive Strength | 138 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 204 | °C | ASTM D648 |
| Continuous Use Temperature | 149 | °C | ASTM D794 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | 12 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 5.15 to 5.35 | ||
| 1 MHz | 4.80 to 5.00 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 0.017 to 0.019 | ||
| 1 MHz | 0.010 to 0.012 | ||
| Arc Resistance | 240 | sec | ASTM D495 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.57 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Method A (Short-Time) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MBA HDPE 1107 E | MBA Polymers | HDPE | MBA HDPE |
| TEPCON® M25 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | TEPCON® |
| Wondel® P PR0 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| CALIBRE™ 893-10 | Trinseo | PC | CALIBRE™ |
| ULTEM™ 1100 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
