Order Products : sales@su-jiao.com
Braskem PE IN-34
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UIa6yp_Braskem-PE-IN-34.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IN34 is a Linear Low density Polyethylene, narrow molecular weight butene-1 copolymer, produced by solution process, for injection molding applications. It offers high fluidity, excellent flexibility and low warpage. Application: It is specially developed for lids fast-cycle molding injection, natural color and dyed for food. It is also recommended for the market food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.939 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 48 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 54 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 19.0 | MPa | |
| Break, Compression Molded | 10.0 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield, Compression Molded | 12 | % | |
| Break, Compression Molded | 100 | % | |
| Apparent Bending Modulus | 645 | MPa | ASTM D747 |
| Flexural Modulus - 1% Secant (Compression Molded) | 640 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 70 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 49.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 100 | °C | ASTM D1525 1 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rigidity | 645 | MPa | ASTM D747 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sumitomo DAP 52-40-40-P | Sumitomo Bakelite North America, Inc. | DAP | Sumitomo DAP |
| Braskem PP PD 943XP | Braskem | PP Homopolymer | Braskem PP |
| ASTALOY™ ASA/PET MDA256 | Marplex Australia Pty. Ltd. | ASA+PET | ASTALOY™ |
| Hanwha Total PP RF450 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| TECHNO ABS 430 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
