Order Products : sales@su-jiao.com
InnoPlus LD2420T
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | PTT Global Chemical Public Company Limited |
| Trademark: | InnoPlus |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UGxpTy_InnoPlus-LD2420T.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
InnoPlus LD2420T is produced by high pressure tubular process, a technology licensed by LyondellBasell. This grade designed for injection molding which offers easy processability and fast cycling. InnoPlus LD2420T is suitable for injection molding such as flexible closures, lids, toys and masterbatch carrier, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 36 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 280 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Compression Molded) | 11.0 | MPa | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Melting Temperature | 112 | °C | ISO 11357-3 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2519G | Teknor Apex Company | TPE | Telcar® |
| TRISTAR® PC-10R | Polymer Technology and Services, LLC | PC | TRISTAR® |
| Ferro PP NPP00GW35HB | Ferro Corporation | PP, Unspecified | Ferro PP |
| JSR EPR EP35 | JSR Corporation | EPDM | JSR EPR |
| KEBATER® PBT B510 | BARLOG plastics GmbH | PBT | KEBATER® |
