Order Products : sales@su-jiao.com
Sinvicomp SIZ5109O
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UErRwD_Sinvicomp-SIZ5109O.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| "Sinvicomp" SIZ 5109O is a wire & cable polyvinylchloride compound available in pellet form. SIZ 5109O provides good performance for insulation of electrical wires. |
| General Information | |
|---|---|
| Uses |
|
| Cable Type (IEC 60502) |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 1.40 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A, 10 seconds | 88 | ASTM D2240 | |
| Shaw D, 10 seconds | 34 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 18.0 | MPa | IEC 811-1-1 |
| Tensile Elongation (Break) | 250 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength 2(70°C, 4 hr, in IRM 902 Oil) | 8.0 | % | IEC 60811-2-1 |
| Change in Ultimate Elongation 3(70°C, 4 hr, in IRM 902 Oil) | 14 | % | IEC 60811-2-1 |
| Changes in mechanical properties after hot air aging test, 100°C, 168 hr 4 | IEC 60811-1-1 | ||
| Tensile strength change | 8 | % | IEC 60811-1-1 |
| Change in tensile elongation | 12 | % | IEC 60811-1-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -20.0 | °C | ASTM D746 |
| Thermal deformation- 120°C, 1hr (120°C) | 15 | % | BS 6746 |
| Thermal stability- Congo Red (190°C) | > 1.0 | hr | BS 2782 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.0E+14 | ohms·cm | BS 2782 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 26 | % | ASTM D2863 |
| Additional Information |
|---|
| Typical temperature profile for processing SINVICOMP compound is from 160°C to 175°C. The optimum temperatures depend on the type of machine as well as screw design being used to process SINVICOMP.Feeding zone: 150°C~160°CCompression zone: 160°C~170°CMixing zone: 170°C~175°CNozzle/Die Zone: 175°C |
| Note Message | |
|---|---|
| 1 . | @23°C |
| 2 . | 70±2°C |
| 3 . | 70±2°C |
| 4 . | 100±2°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vipel® F764-PTA-27 | AOC, L.L.C. | Polyester Alloy | Vipel® |
| YUNCON® N90-01 | YunNan YunTianHua Co., Ltd. | Acetal (POM) Copolymer | YUNCON® |
| Gallonprene® GP210-6006 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Kumho ABS HU600DS | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| Polimid A 35 GF V0F K | Poliblend S.p.a. | Nylon 66 | Polimid A |
