Order Products : sales@su-jiao.com
ExxonMobil™ LLDPE LL 8555 Series
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | ExxonMobil™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UCDfZ6_ExxonMobil-LLDPE-LL-8555-Series.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LL 8555 is a linear low density ethane copolymer with excellent processability, good size control, whiteness and low warpage. The resin can be ideally used for applications that require excellent surface appearance and excellent balance between environmental stress cracking resistance, toughness and hardness. |
| General Information | |
|---|---|
| Additive |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.8 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, F50 | 51.0 | hr | ASTM D1693A |
| 100% Igepal, F50 | > 1000 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 15.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 572 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength | ARM | ||
| -40°C, 3.18 mm | 80 | J | ARM |
| -40°C, 6.35 mm | 203 | J | ARM |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 52.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 36.0 | °C | ASTM D648 |
| Peak Melting Temperature | 126 | °C | ASTM D3418 |
| Additional Information |
|---|
| '- 除了 ESCR 是基于模压样本测定之外，所有物理性能均基于 3 mm 的滚塑样本 测定，除非注明的是其他值。 拉伸测试以 50 mm/min 的十字头速度进行。所报告的拉伸强度指的是在测试过 程中达到的最大应力。 可以修改测试流程以适应操作条件或设施限制。 |
| Legal statement |
|---|
| 有关潜在食品接触应用合规信息（例如：FDA、EU、HPFB），请与埃克森美孚化工客户服务代表联系。本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tekuform C27 | TEKUMA Kunststoff GmbH | Acetal (POM) Copolymer | Tekuform |
| Ad-Tech Epoxy EL-315-IHL | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Formolene® L62608 | Formosa Plastics Corporation, U.S.A. | LLDPE | Formolene® |
| Hostacom EKC 330N E1 | LyondellBasell Industries | PP, Unspecified | Hostacom |
| POLYFLAM® RPP 2120 | A. Schulman Europe | PP Homopolymer | POLYFLAM® |
