Order Products : sales@su-jiao.com
AT 7110
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Celanese EVA Performance Polymers |
| Trademark: | AT |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UB1pdf_AT-7110.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AT® 7110 is a low density polyethylene (LDPE) homopolymer. This polymer complies with the requirements of USP PLASTIC Class VI with regard to biocompatibility and CFR 21 177.1520 of the Food and Drug Administration (FDA) subject to extraction limitations for specific end use applications. This polymer may be processed using conventional polymer processing equipments including extrusion, injection molding, thermoforming, blown film and blow filled seal (BFS) processes. AT® 7110 is used as packaging material for food, nutrient and pharmaceutical ingredients, as well as in applications involving devices and implants. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.80 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 269 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 99.6 | °C | ASTM D1525 |
| Melting Temperature | 114 | °C | DSC |
| Additional Information |
|---|
| The value listed as Density ASTM D1505, was also tested in accordance with ASTM D1928 ProcC Mod. |
| Note Message | |
|---|---|
| 1 . | Type 4, 50mm/min |
| 2 . | Type 4, 50mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 5 FRA 5 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Stylac™ 783 | Asahi Kasei Chemicals Corporation | AS | Stylac™ |
| Torelina® A610MG1 | Toray Resin Company | PPS | Torelina® |
| DOW™ LDPE 310E | The Dow Chemical Company | LDPE | DOW™ LDPE |
| HAIPLEN H30 G6 BA X0 | Taro Plast S.p.A. | PP Homopolymer | HAIPLEN |
