Order Products : sales@su-jiao.com
Advanced Composites ATX646M
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | UApOQ9_Advanced-Composites-ATX646M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ATX646M is a polypropylene product,. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.957 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 24 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 25.4 | MPa | ISO 527-2 |
| Flexural Modulus | 1620 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 4.0 | kJ/m² | ISO 180 |
| 23°C | 37 | kJ/m² | ISO 180 |
| Instrumented Dart Impact | ASTM D3763 | ||
| 0°C | 36.0 | J | ASTM D3763 |
| 23°C | 35.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 110 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 62.0 | °C | ISO 75-2/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | > 2.0 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 210 - 216 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 210 | °C | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 37.8 - 48.9 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 50 to 60% of machine capacityScrew RPM: 1 to 2 secs before mold open |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenite™ Propionate 307A2R30013 Natural, Trsp | Eastman Chemical Company | CAP | Tenite™ Propionate |
| Electrafil® PC 05004 FR | Techmer Engineered Solutions | PC | Electrafil® |
| Geon™ 140 Series 140X466 | Mexichem Specialty Resins, Inc. | PVC Homopolymer | Geon™ 140 Series |
| OnForce™ LFT LF6600-5013 Grey | PolyOne Corporation | Nylon 66 | OnForce™ LFT |
| Moplen EP200R | PolyMirae | PP Impact Copolymer | Moplen |
