Order Products : sales@su-jiao.com

Alcryn® 2095 BK

Category:	MPR , Melt Processable Rubber
Manufacturer:	Advanced Polymer Alloys
Trademark:	Alcryn®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UAnmsT_Alcryn-2095-BK.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Alcryn®2095 BK is a melt processable rubber (MPR) material,. This product is available in North America, Europe or Asia Pacific. The processing methods are: blow molding, extrusion, compression molding or injection molding.

Alcryn®The main features of 2095 BK are:

Comply with WEEE standard

ROHS certification

high liquidity

Good UV resistance

good weather resistance

Typical application areas include:

Wire and cable

engineering/industrial accessories

Hose

sheet

textile/fiber

General Information
Additive	UV stabilizer
Features	Shock absorption Noise reduction Good UV resistance High liquidity Ozone resistance Good weather resistance Heat resistance, high Oil resistance
Uses	Handle Cable sheath Wire sheath Washer Engineering accessories Pipe Pipe fittings Seals Weather-resistant sealing strip Sheet Fabric
Agency Ratings	EU 2002/96/EC (WEEE)
RoHS Compliance	RoHS compliance
Appearance	Black
Forms	Particle
Processing Method	Blow molding Extrusion Compression molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.17	g/cm³	ASTM D792, ISO 1183

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1.91mm, molded)	93		ASTM D2240
IRHD Hardness	93		ISO 48

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (1.91mm, molded)	8.48	MPa	ASTM D638, ISO 527-2
Tensile Strength (yield, 1.91mm, molding)	13.1	MPa	ASTM D638, ISO 527-2
Tensile Elongation (fracture, 1.91mm, molded)	300	%	ASTM D638, ISO 527-2

Elastomers	Nominal Value	Unit	Test Method
Tensile Set	24	%	ASTM D412
Tear Strength ¹(24°C)	62.2	kN/m	ASTM D624

Aging	Nominal Value	Unit	Test Method
Change in Volume			ASTM D471
24°C, 168 hr, in reference fuel B	43	%	ASTM D471
100°C, 168 hr, ASTM Standard Oil (No.1)	-10	%	ASTM D471
100°C, 168 hr, ASTM Standard Oil (No.3)	31	%	ASTM D471

Additional Information
The value listed as Density-Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.Fluid Resistance 7 Days in ASTM Oil no. 1, ISO 1817, at 212 °F: -1%Fluid Resistance 7 Days in IRM 903 Oil no. 3, ISO 1817, at 212 °F: 31%Fluid Resistance 7 Days in ASTM Ref. Fuel no. B, ISO 1817, at 75 °F: 43%Rheological Viscosity, ASTM D3835, 1/300s at 374°F: 820Pa-s

Injection	Nominal Value	Unit
Processing (Melt) Temp	177	°C

Note Message
1 .	C mould

Resin Grade	Manufacturer	Category	Trademark
Stanyl® TE351	DSM Engineering Plastics	Nylon 46	Stanyl®
ENGAGE™ 8402	The Dow Chemical Company	TPO (POE)	ENGAGE™
KOPA® KN3322V0Y	Kolon Plastics, Inc.	Nylon 66	KOPA®
LUVOCOM® 1301-8646	Lehmann & Voss & Co.	PPS	LUVOCOM®
Sylvin 29168-80 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin