Order Products : sales@su-jiao.com
Vi-Chem PVC VNC75I-7261
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Vi-Chem Corporation |
| Trademark: | Vi-Chem PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U8fTZz_Vi-Chem-PVC-VNC75I-7261.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vi-Chem PVC VNC75I-7261 is a Flexible Polyvinyl Chloride material. It is available in North America for injection molding. Typical application of Vi-Chem PVC VNC75I-7261: Automotive |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792A, ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, 2.00 mm, Compression Molded) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (2.00 mm, Compression Molded) | 11.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, 2.00 mm, Compression Molded) | 280 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 42.3 | kN/m | ASTM D624 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (80°C, 100 hr) | 2.2 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (80°C, 100 hr) | -9.9 | % | ASTM D573 |
| Change in Mass in Air (80.0°C, 100 hr) | 1.1 | % | ASTM D573 |
| Thermal | Nominal Value | ||
|---|---|---|---|
| Cold Flexibility (-30°C) 2 | Pass |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Color Stability 3 | 4.00 | Multiple Standards | |
| Florida Weathering | |||
| -- 4 | > 1.64 | ||
| -- 5 | > 0.850 | ||
| Stain Resistance | |||
| -- 6 | Pass | ||
| -- 7 | Pass | ||
| Xenon Weatherometer 8 | > 0.940 |
| Note Message | |
|---|---|
| 1 . | Compression molded, 2 mm |
| 2 . | FLTM BN 102-01 |
| 3 . | ISO 188/ASTM D573, AATCC |
| 4 . | 12 months, FLTM BI 160-01, 5° South direct |
| 5 . | 24 months, Delta E |
| 6 . | Paint, FLTM BP 153-01 |
| 7 . | Hydrogen Sulfide, FLTM 102-01 |
| 8 . | SAE J1960-89, 2500 kJ/m² exposure, Delta E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P1980 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| THERMOLAST® K TC4FRN (Series: FR) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Diaterm® A27 SR | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 6 | Diaterm® |
| Hy-Vin® VQ130 | INEOS Compounds | PVC, Rigid | Hy-Vin® |
| TECHNYL® A 60G1 V30 BLACK 15 N | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
