Order Products : sales@su-jiao.com
ASI POLYPROPYLENE 984
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYPROPYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | U6Og6G_ASI-POLYPROPYLENE-984.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 984 is a medium impact polypropylene used primarily for automotive parts subjected to impact. It is available in colors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 to 10 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 1000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 100 | J/m | ASTM D256 |
| Gardner Impact (-30°C) | 10.8 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Flammability | Nominal Value | Unit | |
|---|---|---|---|
| Burning Rate | < 100 | mm/min |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Verolloy A2703 | PlastxWorld Inc. | ABS+Nylon | Verolloy |
| TORZEN® G5000HSL BK20 | INVISTA Engineering Polymers | Nylon 66 | TORZEN® |
| Yuyao PA 03ML30 | Yuyao Tenglong Plastics Co., Ltd. | Nylon 66/6 | Yuyao PA |
| ALCOM® PBT 700/1 GF20 PTFE15 | ALBIS PLASTIC GmbH | PBT | ALCOM® PBT |
| Andur 7003 AP-S/Curene® 89-LC | Anderson Development Company | PUR-Ether/TDI | Andur |
