Order Products : sales@su-jiao.com

PTFA 05

Category:	PE, Unspecified , Polyethylene
Manufacturer:	Polymer Tailoring Ltd.
Trademark:	PTFA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	U6AK1L_PTFA-05.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PTFA 05 is an innovative development in the quest to replace PVC compounds. It is a halogen-free, environmentally-friendly, flame-retarded compound which has already been selected for profile extrusions (e.g. windows and electrical conduits) and blow moulding (e.g. plastic chairs). These fabrication processes require melt strengths and elasticities which, until now, only PVC compounds or non-flame-retarded polyolefins could supply. Through careful formulation, PTFA 05 meets these requirements, and more, and without a hint of halogen. Articles made from this compound will meet the environmental criteria of both the WEEE and ROHS Directives, as PTFA 05 is 100% environmentally-friendly.

Message

PTFA 05 is an innovative development in the quest to replace PVC compounds. It is a halogen-free, environmentally-friendly, flame-retarded compound which has already been selected for profile extrusions (e.g. windows and electrical conduits) and blow moulding (e.g. plastic chairs). These fabrication processes require melt strengths and elasticities which, until now, only PVC compounds or non-flame-retarded polyolefins could supply. Through careful formulation, PTFA 05 meets these requirements, and more, and without a hint of halogen. Articles made from this compound will meet the environmental criteria of both the WEEE and ROHS Directives, as PTFA 05 is 100% environmentally-friendly.

General Information
Features	Environmentally Sound Flame Retardant Good Melt Strength Good Processability Halogen Free Low Density
Appearance	Black Blue Natural Color White
Processing Method	Blow Molding Profile Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.980	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.50	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	28.0	MPa	ISO 527-2
Tensile Strain (Break)	23	%	ISO 527-2

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength	35	kJ/m²	ISO 179

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
1.60 mm	V-0
3.20 mm	V-0 5V
Oxygen Index	> 36	%	ASTM D2863

Additional Information	Nominal Value	Unit
UV Stability	> 150	kLy

Resin Grade	Manufacturer	Category	Trademark
Sarlink® TPV 4175	Teknor Apex Company	TPV	Sarlink® TPV
TYRIN™ CM 3630E EL	The Dow Chemical Company	CPE	TYRIN™
APEX® 90-A471R-85-NT	Teknor Apex Company	PVC, Flexible	APEX®
Hanwha Total PE P110Y	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	HDPE	Hanwha Total PE
KOPLA PC KBG1060	KOPLA Co., Ltd.	PBT	KOPLA PC