Order Products : sales@su-jiao.com

SILVER® SA-1104

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	U2fiE1_SILVER-SA-1104.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment. SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber) Characteristics: similar to thermoset rubber in physical properties Applications: toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

Message

SlLVER® SA-1000 elastomer is a kind of thermoplastic elastomer comprising of unsaturated styrene—butadiene rubber for indoor room temperature applications, such as toys, clear product, bearing seals and sole, which is similar to thermoset rubber in physical properties. And SA—1000 elastomer can be injected or extruded on thermoplastic equipment.

SA—1000 Elastomer (Unsaturated Styrene—butadiene Rubber)

Characteristics:

similar to thermoset rubber in physical properties

Applications:

toys, seal ring, cushion blocking, insole, sole, fender board, cap of pen, truckle, tire and so on

General Information
Features	Copolymer
Uses	Caps Footwear Seals Tires Toys
Appearance	Clear/Transparent
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.908	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (130°C/2.16 kg)	14	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	35		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	1.30	MPa	ASTM D638
Tensile Elongation ²(Break)	> 500	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	130 to 170	°C

Extrusion	Nominal Value	Unit
Melt Temperature	130 to 170	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
NEFTEKHIM PP 4345U	Nizhnekamskneftekhim Inc.	PP Copolymer	NEFTEKHIM PP
EVALENE® HDPE HB33531	JG Summit Petrochemical Corporation	HDPE	EVALENE® HDPE
HiFill® PET GF15 X BK	Techmer Engineered Solutions	PET	HiFill®
HiFill® PA6 GF30 L	Techmer Engineered Solutions	Nylon 6	HiFill®
INLUBE PA610GF35TF5	Infinity LTL Engineered Compounds	Nylon 610	INLUBE