Order Products : sales@su-jiao.com
INVISION™ GX 5187G3
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | INVISION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TzsQLu_INVISION-GX-5187G3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Extrusion TPE Styrenic Rubber |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 86 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 13.0 | MPa | ISO 527-2/500 |
| Tensile Strain (Break) | 700 | % | ISO 527-2/500 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 60 | kN/m | ISO 34-1 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (200°C, 243 sec^-1) | 270 | Pa·s | ASTM D3835 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polyvel PLA HD-L02 PLA Impact Modifier (Transparent) | Polyvel Inc. | PLA | Polyvel PLA |
| Comco PA 6 G heat stabilized | Comco-Plastic GmbH | Nylon 6 | Comco |
| CYREX® 200-8005 | Evonik Cyro LLC | PC+Acrylic | CYREX® |
| Latilub 57-30GRTS G/20 | LATI S.p.A. | PPA | Latilub |
| Sylvin 9077-80 White 1441 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
