Order Products : sales@su-jiao.com
MTEGRITY™ LDPE LD225AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | M. Holland Company |
| Trademark: | MTEGRITY™ LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tzg50b_MTEGRITY-LDPE-LD225AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| MTEGRITY™ LDPE LD225AA is a Low Density Polyethylene product. It can be processed by blow molding or blown film and is available in North America. Applications of MTEGRITY™ LDPE LD225AA include bottles, containers and film. Primary characteristic: good toughness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD | 179 | MPa | |
| 1% Secant, TD | 207 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 24.8 | MPa | |
| TD : Yield | 17.9 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 300 | % | |
| TD : Break | 600 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® R200 T53 | Ravago Group | Nylon 6 | Ravamid® |
| Radilon® S CV300 100 NAT | Radici Plastics | Nylon 6 | Radilon® |
| Stratasys ABSi | Stratasys | ABS | Stratasys |
| Comco PA 6 G MOS 2 | Comco-Plastic GmbH | Nylon 6 | Comco |
| Daelim Po1y® DHC-1 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
