Order Products : sales@su-jiao.com

DOW™ MDPE DPDA-3135 NT 7

Category:	MDPE , Medium Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ MDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Txp80N_DOW-MDPE-DPDA-3135-NT-7.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

DOW™ DPDA-3135 NT 7 Medium Density Polyethylene (MDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for rotational and injection molding. It is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties.

Processing and Stabilization: DOW DPDA-3135 NT 7 MDPE Resin is fully heat and UV stabilized resulting in a wide processing latitude, good color retention and long life expectancy.

Rotational molding or injection molding

For intermediate bulk containers, toys, general purpose custom molding, agricultural storage tanks, water tanks, marine parts, indoor consumer articles

Excellent impact strength, stress crack resistance and processability

Long term UV stabilization: UV-8 stabilizer package

Complies with:

U.S. FDA 21 CFR 177.1520 (c)3.1a

Canadian HPFB No Objection

Underwriters Laboratories Inc.

EU, 10/2011

NSF International NSF/ANSI Std 61 (sec 4 & 5)

Consult the regulations for complete details.

General Information
Agency Ratings	EU 10/2011 FDA 21 CFR 177.1520(c) 3.1a HPFB (Canada) No Objection NSF 61 UL Unspecified Rating
Forms	Pellets
Processing Method	Injection Molding Rotational Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance ¹			ASTM D1693
10% Igepal, F50	> 89.0	hr
100% Igepal, F50	> 1000	hr

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield)	20.2	MPa	ASTM D638
Flexural Modulus - 1% Secant ³	717	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Impact Strength			ARM
-40°C, 3.18 mm, Rotational Molded	81	J
-40°C, 6.35 mm, Rotational Molded	252	J

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load ⁴			ASTM D648
0.45 MPa, Unannealed	56.1	°C
1.8 MPa, Unannealed	38.3	°C
Melting Temperature (DSC)	127	°C	Internal Method

Note Message
1 .	Plaque molded and tested in accordance with ASTM D4976.
2 .	Plaque molded and tested in accordance with ASTM D4976.
3 .	Plaque molded and tested in accordance with ASTM D4976.
4 .	Plaque molded and tested in accordance with ASTM D4976.

Resin Grade	Manufacturer	Category	Trademark
Smoothblend® ABS-1100	Colour Image Plastic Compound Sdn. Bhd. (CIPC)	ABS	Smoothblend®
Starex SD-0150GP	SAMSUNG SDI CO., LTD.	ABS	Starex
Sylvin 8250-55 Natural	Sylvin Technologies Incorporated	PVC, Flexible	Sylvin
Baytec® ME-230 (67A)	Covestro - PUR	PUR-Ether/MDI	Baytec®
Plaslube® ABS 8004 FR	Techmer Engineered Solutions	ABS	Plaslube®