Order Products : sales@su-jiao.com
Forprene® 6NM901D50
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TxPEZ1_Forprene-6NM901D50.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Forprene® 6NM901D50 is a Thermoplastic Vulcanizate (TPV) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Forprene® 6NM901D50: REACH Compliant. Typical applications include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 51 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 12.2 | MPa | ASTM D412 |
| Tensile Strength 2 | 20.8 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 650 | % | ASTM D412 |
| Tear Strength 4 | 85.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 170 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 185 | °C | |
| Nozzle Temperature | 195 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNITIKA Nylon 6 RUN35-C25 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| Baytec® ME-230 (65D) | Covestro - PUR | PUR-Ether/MDI | Baytec® |
| ALKATEQ™ MD592UV | Marplex Australia Pty. Ltd. | MDPE | ALKATEQ™ |
| BMC 300 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Polifil® PP GFRMPPCC-30 | The Plastics Group | PP Impact Copolymer | Polifil® PP |
