Order Products : sales@su-jiao.com
Durez® 152 (Compression)
| Category: | Phenolic , Phenolic |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Durez® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Tv4tEw_Durez-152-Compression-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Durez 152 Phenolic is a two-stage, heat resistant/ electrical molding material. It exhibits superior dimensional stability, good strength retention at elevated temperature and good molded appearance and machinability which account for it's widespread use on electrical, telecommunication and appliance applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.50 | g/cm³ | ASTM D792 |
| Apparent Density | 0.68 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow | 0.60 | % | ASTM D6289 |
| Water Absorption | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9600 | MPa | ASTM D638 |
| Tensile Strength | 48.0 | MPa | ASTM D638 |
| Flexural Strength | 76.0 | MPa | ASTM D790 |
| Compressive Strength | 207 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 191 | °C | ASTM D648 |
| RTI Elec (3.00 mm) | 160 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| -- 1 | 15 | kV/mm | ASTM D149 |
| -- 2 | 13 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 5.00 | ASTM D2520 | |
| Dissipation Factor (1 MHz) | 0.050 | ASTM D150 | |
| Comparative Tracking Index | 190 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-1 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| 6.00 mm | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 52 | wk |
| Additional Information |
|---|
| Test Specimens Molded at 340-350°FTypical transfer-molded shrinkage is 0.008 in/inDurez 152 is fungus resistant per Mil-I-631D and Mil-E-5272C. |
| Note Message | |
|---|---|
| 1 . | Method A (short time) |
| 2 . | Method B (step by step) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RIALBATCH C 15 70 B2 | RIALTI Srl | PP Copolymer | RIALBATCH |
| Stanyl® TW241F6 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| DOMAMID® 6G25 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| Fortron® 6150T6 | Celanese Corporation | PPS | Fortron® |
| ELASTOSIL® R plus 4360/60 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
